New & Used Machinery for sale here at Sinclair Agricultural & Recycling Services. If you would like any more information on any of the below then please contact our Sales Manager Steve on Steve@sinclaircontractors.co.uk or go to the Contact Us page of the website.

 

5
Yes
None
1
Search...
/new-used-machinery/

New & Used Machinery

A full list of the new and used machinery we have on sale here at Sinclair Agricultural and Recycling Services. You work closely with a lot of firms in order to bring the best machinery to you in the North East.
Thumbnail

Categories:

Used
Used 24 Meter John Deere 512 Sprayer
£7000.00
Used 24 Meter John Deere 512 Sprayer Image

Godd working condition John Deere 512 Sprayer 24 meters. Manufactured in 2008 and has been worked for 3 years.

Used Marshall Barrel Spreader
£2750.00
Used Marshall Barrel Spreader Image

Mint condition, only used for 1 season, Marshall Barrel Spreader. With 9cubes capacity and flotation tyres this spreader is only 8 years old.

14 Foot Tri-Axle, 3.5 tonne gross Flatbed Trailer
Varies on spec
14 Foot Tri-Axle, 3.5 tonne gross Flatbed Trailer Image

Brand new 14 Foot Tri-Axle, 3.5 tonne gross Nugent Flatbed Trailer

BRAND NEW Trioliet Feed Wagon
POA
BRAND NEW Trioliet Feed Wagon Image

TRIOLIET FEED WAGON BRAND NEW AND NEVER BEEN USED.

1800 ZK
Electronic Weighing
Reduction Gearbox
LED Lights
20mm Augers
2x Top Knives
4x Long Knives
6x Short Knives
Rubber Hayring
900mm Discharge Elevator on RHS

The In Stock machine is available to be used as a Demo Machine – for further information on organising a demo please contact us. Demo’s are given on a first-come-first served basis for dates.

Don Valley Grass Seed
POA
Don Valley Grass Seed Image

We offer a selection of Don Valley Agricultural Grass Seed. For further information please contact us

Gravel Road Grader
POA
Gravel Road Grader Image

The Murray Gravel Road Grader is designed to level out any gravel road that has fallen into disrepair, by levelling off the high spots on the road and filling in the low spots. it is possible to adjust the camber on the grader so that the road can be left high in the middle to allow the rain water to run off. The grader is fitted with three point linkage brackets so that it can be pulled by any medium to high powered tractor.

Machinery Oil
POA
Machinery Oil Image

GB Lubricants Machinery Oil

Oil to suit most tractors and machinery working in either the Agricultural or Plant environment. We have the facility to spec oil types as required by specific machinery. Grease is also available in specialised cartridges and with the new style grease gun which is quicker and cleaner.

Marshall BC Pallet/Bale Trailer Range
POA
Marshall BC Pallet/Bale Trailer Range Image

The basic construction methods and materials used in the BC range ensures that every model conforms to the heavy-duty build standard of all Marshall products.

Chassis Design – every model benefits from heavy-duty channels to form a square chassis design that improves rigidity and reduces flexing during loading.

Bed Design – the entire range has a no-cost option of 30mm treated pine floors or non-slip chequered plate steel floors. The side runners and floor bearers are constructed form box-section to improve strength and remove any places where water could sit.

21″ Fixed Headboard – standard on all models, except our BC/18, this also dramatically increases the rigidity of the trailer.

It is the small details of the Marshall BC range that set it apart from the competition, with numerous features that make the trailers simple to use and most importantly, extremely practical; such as harvest ladders, rope hooks, commercial grade light units, rear crash barrier and a rear toolbox.

If you are interested int he BC Pallet/Bale Trailer Range then please get in touch.

Marshall Drop-side Range Steel Trailers
POA
Marshall Drop-side Range Steel Trailers Image

The Marshall range of drop-side trailers can be configured to suit almost any requirement.

Grain Sides – Available on S/5 upwards; comes complete with a full height door to allow bulky loads to be safely discharged

Silage Sides – Available on S/5 upwards; comes complete with two side loading panels and uses Marshall’s unique hydraulic silage door locking system fitted to the rear of the trailer, preventing any damage from the side.

Mesh Sides – Available on all models; these sides simply bolt on to the trailer. They provide an increased capacity for light loads such as leaves and grass.

Bale Extension & Harvest Ladders – Available on S/4 upwards; the extension increase the bed lengths of our S/4, S/5 & S/6 models by 3′ and our S/85 & S/10 models by 4′.

There are also a number of other options available such as door, lighting and tyre options.

For further information on our drop trailers please contact us.

Marshall FB Feed Barrier Range
POA
Marshall FB Feed Barrier Range Image

Simple and Strong

Frame Design – box section steel framework, which benefits from a fully welded construction for strength and rigidity. The ends of our feed barriers are also profiled from 5mm steel to further enhance the build quality.

Side & Floor Design – 30mm treated pine is used for the floor and sides, which allows effluent to escape and can be easily replaced when worn out.

Marshall FT Feed Trailer Range
POA
Marshall FT Feed Trailer Range Image

Construction – tapered sides to allow for easy feeding. Every model also benefits from a fully welded steel construction with 5mm ends and 3mm or 4mm sides.

Floor – the entire range has 30mm treated pine floors, which allows effluent to escape and can easily be replaced when worn out.

Full Opening Removable Rear Door – allows feed trailers to be easily cleaned out.

Retractable Drawbar – maximizes number of available feed spaces.

Axles – new 6 stud 70mm beam axles are used on both models in the range.

Marshall HD Hybrid Dumper Trailer Range
POA
Marshall HD Hybrid Dumper Trailer Range Image

The HD hybrid dumper trailer range has been designed to handle a wide variety of different tasks; from shifting muck on farm to the toughest construction work.

Rubble & Stone – the floor on the HD/6 model is 6mm thick, with the rest of the range benefiting from an 8mm rock floor. the HD/6 and HD/8 models have 5mm sides, with larger models being fitted with 6mm sides. The pressed design of the body further adds to the overall strength and rigidity; ensuring each model can handle rubble, stone or any other heavy material. In addition each model has been designed with a very generous cubic capacity to ensure that the stated loads can actually be carried. Finally the entire HD range benefits from the option of a hydraulic door to compliment the standard scow-end and increase carrying capacity. The hydraulic door option can also be “dealer fitted” to every model, allowing the trailers to be upgraded in the future.

Muck – the large cubic capacities and robust build make the hybrid dumper range ideal for carrying muck. The elevated rear tipping points and high tipping angle allows the load to be heaped up when discharged. The tipping mechanism is also very robust; with the HD/12 model upwards utilising chrome rams to prevent corrosion and premature seal failures. In addition the tipping points on larger models are formed by 50mm steel pins complete with devlon bushes and grease points.

Stone Guard – The HD range comes with a standard stone guard at the front to help[ protect the tractor operator and the tractor itself from debris. It is formed by our CNC machines and is bolt-on allowing it to be replaced if it is damaged or completely removed for better visibility.

If you would like further information on our HD Hybrid Dumper Trailer Range then please get in touch.

Marshall Livestock Container Range
POA
Marshall Livestock Container Range Image

The livestock container range provides a simple, efficient and good value way to shift livestock between farms or transport them to market.

Value – our livestock containers all provide an excellent value method for moving livestock. There is no need to have an HGV license or to have passed a trailer test; simply the ability to drive a tractor. Our fixed livestock containers are particularly good value, starting at £10,878 retail, there are few others ways to move livestock at the price.

Box Design – every model is constructed from steel and has its own chequered plate floor that is coated with anti-slip paint. Internal slam-shut dividing gates are standard on all models and can be positioned anywhere along the length of the container.

Loading Ramp Design – all models benefit from an aluminium chequered plate loading ramp that has two helper springs to assist closing and opening.

Marshall MS Muck Spreader Range
POA
Marshall MS Muck Spreader Range Image

The legendary MS range has been developed over thirty years of producing muck spreaders; with a number of unique design features and durable construction the MS range continues to be the industry leading spreader.

Barrel Design – the barrels on all models are fully welded and are either 4mm thick on our MS/45, MS/60 and MS/75 models or 4.5mm thick on our larger models. The ends on all models are also heavy-duty with 6mm thick ends to provide an excellent service life.

Chassis Design – an integral chassis design has been part of the Marshall spreader for over thirty years. It removes any stress on the barrel of the spreader to prevent premature fatigue or cracking.

Lid Design – every model in the range benefits from a stainless steel lid ram to eliminate corrosion. Our lids open to 89 degrees, allowing easy loading and reducing the possibility of damage.

Brakes & lights – brakes and lights come as standard on all models, except our MS/45. This ensures all out spreaders comply with both highway and health & safety regulations.

Marshall QM Monocoque Trailer Range
POA
Marshall QM Monocoque Trailer Range Image

The QM range combines superior construction and clever design to create trailers that are strong, reliable and durable; the basic requirements of any good trailer

Body Design – the floors of the entire range are 5mm thick and the sides are either 3.5mm or 4mm thick, ensuring an extended service life. When mudgards are specified the floor thickness of the trailer above the wheels is 10mm and the mudguards are designed to bolt on, so in the event they are damaged they can be easily replaced. Every model also benefits from a fully welded construction with a substantial number of floor and side bearers to improve overall rigidity and strength,

Chassis Design – the Qm/11 model upwards uses a unique chassis design that is formed from heavy duty channels with 8mm or 10mm reinforcing plates stitch welded to the channels. This set-up provides unrivalled strength, while also allowing the chassis to flex when required, if the chassis is too rigid then it can become prone to cracking and premature failure.

Tipping Mechanism – the tipping points on our QM/6 and QM/8 models use a toughened 24mm bolt and on our QM/11 model upwards, a fully bushed 50mm solid steel bar is used to eliminate any potential weak link in the design. Similarly our QM/11 model upwards also benefits from twin industrial chrome rams, which are comparable to the rams used on construction excavators; this prevents any harmful corrosion an provides years of trouble free operation.

With ever increasing tractors speeds and heavier loads having the correct running gear has never been more important, accordingly our entire QM range is prepared to handle these challenges.

If you want to find our more about the range then please get in contact with us

Marshall ST Slurry Tanker Range
POA
Marshall ST Slurry Tanker Range Image

The ST slurry tanker range has been developed with strength and durability as the guiding principles.

Tank Design – every model has a 6mm thick steel tank that is rolled and fully-welded by a sub-arc welder to ensure a consistent and robust finish. Inside the tank there are baffles to ensure material is transported safely and reinforcing rings to further enhance the tanks strength. It is also important to note that all our tanks hold the stated capacity; even our LGP cut in tanks are increased in size to compensate for the cut-out part.

Chassis Design – the overall rigidity of our tanker range is boosted by the integral chassis, which supports the tank to reduce fatigue and prevent premature failure.

Axles & Brakes – every model has hydraulic brakes as standard with the option to upgrade to air brakes. Our ST/2000 model upwards has 406×120 10 stud commercial axles and spring drawbars as standard to ensure safe movement on the road. Dropped axles are also standard on these larger models to lower the centre of gravity and improve stability.

Lights – lights are also standard on all models with the option to upgrade to LED lights and fit a LED Beacon.

Every model in the range has been intelligently designed for excellent everyday usability and practicality.

Marshall VES Rear-Discharge Spreader Range
POA
Marshall VES Rear-Discharge Spreader Range Image

No floor chains = no problems.

The Marshall VES range is the next step forward in the design of rear-discharge spreaders, eliminating the problematic floor-chain set-up and the associated maintenance requirements. This mechanism is replaced by a patented hydraulic pushing ram that is fully speed controllable and provides unmatched benefits.

Maintenance – the only regular maintenance require on our VES range is to grease the bearings via remote grease points and to check the oil level in the gearbox.

Reliability – every model utilises a 4 stage, chrome ram that has been specifically design ed and produced for our VES range for incredible reliability compared to traditional floor chains.

Compact Design – the removal of floor chains allows our VES range to have a shorter; deeper body that increases capacity and improves manoeuvrability.

Ground Clearance & Traction – the VES range also has improved ground clearance due to the removal of floor chains; 520mm minimum ground clearance on the VES/1500 model. In addition the axle on all our models can be placed further back since there is no gearbox required to drive the floor chains, this improves traction and reduces weight transfer when spreading.

Slurry Spreading – the VES range benefits from a completely sealed box, there are no gaps for the floor chains. Combined with the standard slurry door on all models means the VES range can properly hold and spread slurry.

The unique hydraulic ram concept of our VES range is not its only selling point. The robust construction and heavy-duty components used in every model means the VES range is ready for the toughest challenges.

Murray Machinery 4 in 1 Bucket
POA
Murray Machinery 4 in 1 Bucket Image

The Murray Four in One Bucket is a multi purpose bucket/blade with a variety of applications around the farm or building site.

The Bucket comprises of two halves, the rear half being attached to any loader or telescopic handler, the front half or blade is attached to the rear half by two pivot pins at the top, the front blade is activated by two double acting hydraulic cylinders allowing it to be opened or closed to the operators particular requirements.

Murray Machinery Big Bag Lifter
POA
Murray Machinery Big Bag Lifter Image

The Murray Big Bag Lifter is designed to lift up to 4 Big Bags to a maximum weight of 2.4 tons. Two extra heavy duty tubes are welded to the top of a heavy box section frame giving the bag lifter extra height for filling fertiliser spreaders and seed drills. The bag lifter can be fitted with a range of mounting brackets to suit most tractor loaders and Telescopic Handlers.

Murray Machinery Big Bale Multihandler
POA
Murray Machinery Big Bale Multihandler Image

The Murray Big Bale Multi Handler is designed to handle round bales, square bales, wrapped or unwrapped bales. The framework is constructed from heavy box section with a paddle frame pivoted at the front, which can be adjusted in and out to suit different sized bales, the paddle is activated by a double acting hydraulic cylinder. A range of loader or tele handler mounting brackets are available.

Murray Machinery Big Bale Stacker
POA
Murray Machinery Big Bale Stacker Image

Our range of telescopic handler and tractor loader attachments include

Quick Hitch Systems
Grain Buckets
Big Bale Spikes
Potato Box Tippler
Manure Forks
Pallet Forks
Stone Forks

Special orders catered for,

Murray Machinery Big Bale Transporter
POA
Murray Machinery Big Bale Transporter Image

The Murray Big Bale Transporter is a multi-bale spike capable of up-loading four big bales up to 5 in diameter in one operation, so enabling the tractor operator to clear a field of bales in a very short time. The implement fits onto the rear linkage of any tractor and lifts the bales in two tiers, two on the upper frame and two on the lower frame. The upper bales being lifted clear by a single acting hydraulic cylinder to allow lower bales to be picked up. The frames are constructed of heavy box section for maximum rigidity and are fitted with machined tapered sockets for the tines in each frame.

The Murray Big Bale Transporter also comes in a “fold up” version, this is to allow the operator to fold the protruding tines up safely out of harms way when travelling along the public highway when fitted to the rear of any tractor.

Murray Machinery Buckrake Tractor
POA
Murray Machinery Buckrake Tractor Image

The Murray Push Off Buckrake comes in two different versions, one is dedicated to Telescopic Handlers and one is to suit the front of rear linkage of tractors.

The Tele Handler version consists of a rigid back frame constructed from heavy duty box section, with a row of 1500mm long heavy duty tines along the bottom. The “push off gate” is hinged from the top of the back frame, the gate also has a flap hinged at the bottom which follows the contour of the tines when going through the Push off cycle. The gate is activated by two double acting hydraulic cylinders.

On the tractor version the main difference is the “Push Off Gate” which is operated by a cantilever system allowing better discharge going up steep slopes.

Murray Machinery Double Bale Spike
POA
Murray Machinery Double Bale Spike Image

The Murray Double Bale Spike is constructed from heavy duty box section and has four heavy duty tines bolted into sockets along the bottom frame of the spike.

The Murray Double Bale Spike also comes in a “fold up” version, this is to allow the operator to fold the protruding tines up safely out of harms way when travelling along the public highway when fitted to the front or rear of any tractor.

Murray Machinery Fermec Quick Hitch
POA
Murray Machinery Fermec Quick Hitch Image

The purpose of the Murray Quick Hitch Attachment is to allow the operator to change quickly from one implement to another. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. The locking lever can be operated remotely by a hydraulic cylinder if required and is offered as an option.

The Murray Quick Hitch is a “dedicated” hitch. For example – a Quick Hitch for a Ford Loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

As well as out range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adapters. They can be supplied to “hook on” to existing front loader quick hitches to allow them to pick up implements from another Loader or Tele Handler.

Conversion Adapters can also be supplied as “direct mount” by removing the existing quick hitch and fitting the new Quick Hitch conversion adapter directly on to the tractor loader arms or Telescopic Handler boom end.

Murray Machinery Fork Lift Drive in Grain Bucket
POA
Murray Machinery Fork Lift Drive in Grain Bucket Image

The Murray Fork Lift Drive in Grain Bucket is a Hi Tip bucket designed to suit standard mast type forklifts where there is no hydraulic tipping mechanism available. The Drive in bucket consists of a bucket shell attached to a separate undercarriage. The undercarriage is fitted with pockets which allow the forklift operator to drive into with the machines standard pallet fork toes, two double acting hydraulic cylinders activate the bucket and effect complete tipping at high level.

Murray Machinery Fork Lift Hydraulic Tipping Bucket
POA
Murray Machinery Fork Lift Hydraulic Tipping Bucket Image

The Murray Forklift Hydraulic Tipping Bucket is designed for standard mast type forklifts where there is no hydraulic tipping mechanism available. The hydraulic tipping bucket consists of a standard bucket shell, with a hydraulic tipping frame attached to the rear and two double acting hydraulic cylinders to activate the bucket. To attach the bucket to the forklift, the pallet forks have to be removed, the bucket tipping frame is then attached directly on to the fork carriage and is powered by the forklift’s own hydraulic system.

Murray Machinery General Purpose Bucket
POA
Murray Machinery General Purpose Bucket Image

The Murray General Purpose Bucket is designed for heavier work around the farm or building site and is strong enough for digging stones and earth. It has extra bracing at all the stress points and has an anti-spill extension at the top. The bucket can be fitted with digging teeth if required.

Murray Machinery Grain Bucket
POA
Murray Machinery Grain Bucket Image

The Murray Grain Bucket comes in a range of capacities to cover all farm grain handling needs. Front and side leading edges are reinforced for extra durability, wear strips are provided on the underside and bracing on the inside of the bucket all lead to a grain bucket capable of enduring the rigorous of modern grain handling a range of fixing brackets are available to suit most loaders and telescopic handlers.

Murray Machinery Grain Pusher
POA
Murray Machinery Grain Pusher Image

The Murray Grain Pusher is designed to push grain considerably higher than is possible with a standard grain bucket. It consists of a blade which is attached to a long box section frame with Tractor ‘Loader or Telescopic Handler mounting brackets at the opposite end.

Murray Machinery Hi Tip Grain Bucket
POA
Murray Machinery Hi Tip Grain Bucket Image

The Murray Hi Tip Grain Bucket is a combination of a standard Grain Bucket shell fitted to a separate under carriage, which is pivoted at the front of the bucket. Two double acting hydraulic cylinders activate the bucket and effect complete tipping at a very high level. Not only can the Hi Tip Bucket gain between 1 and 1.5 metre extra discharge height, it also achieves approx 1 metre extra forward reach. This can be a great advantage when loading high-sided vehicles as with all other implements the Hi Tip Bucket can be fitted with a range of fixing brackets to suit most loaders and telescopic handlers.

Murray Machinery JCB Quick Hitch
POA
Murray Machinery JCB Quick Hitch Image

The purpose of the Murray Quick Hitch Attachment is to allow the operator to change quickly from one implement to another. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. The locking lever can be operated remotely by a hydraulic cylinder if required and is offered as an option.

The Murray Quick Hitch is a “dedicated” hitch. For example – a Quick Hitch for a Ford Loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

As well as out range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adapters. They can be supplied to “hook on” to existing front loader quick hitches to allow them to pick up implements from another Loader or Tele Handler.

Conversion Adapters can also be supplied as “direct mount” by removing the existing quick hitch and fitting the new Quick Hitch conversion adapter directly on to the tractor loader arms or Telescopic Handler boom end.

Murray Machinery Log Grabber
POA
Murray Machinery Log Grabber Image

The Murray Log Grab is a ruggedly constructed frame with two fixed bottom legs and a two leg top grab hinged at the top of the back frame. The grab is activated by two double acting hydraulic cylinders. The shape of the bottom and top legs allows the grab to squeeze logs of various sizes. The log grab can be fitted to any tractor loader or telescopic handler.

Murray Machinery Merlo/Matbro Adapter
POA
Murray Machinery Merlo/Matbro Adapter Image

 

The purpose of the Murray Quick Hitch Attachment is to allow the operator to change quickly from one implement to another. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into the next and closing the locking lever again. The locking lever can be operated remotely by a hydraulic cylinder if required and is offered as an option.

The Murray Quick Hitch is a “dedicated” hitch. For example – a Quick Hitch for a Ford Loader will pick up implements with Ford fittings only, a Quick Hitch for a JCB loader will pick up implements with JCB fittings only and so on.

Quick Hitch attachments can also be manufactured for loading shovels, they work in the same way as the smaller quick hitches, but they are much more heavily constructed.

As well as out range of standard Quick Hitches, we can offer a range of Quick Hitch Conversion Adapters. They can be supplied to “hook on” to existing front loader quick hitches to allow them to pick up implements from another Loader or Tele Handler.

Conversion Adapters can also be supplied as “direct mount” by removing the existing quick hitch and fitting the new Quick Hitch conversion adapter directly on to the tractor loader arms or Telescopic Handler boom end.

Murray Machinery Muck Fork
POA
Murray Machinery Muck Fork Image

The Murray Muck Fork range is manufactured to suit from the smallest tractor loader right up to the largest telescopic handler.

They are all well constructed from heavy duty box section to create a rigid frame, the bottom member is fitted with full width tapered sockets to suit the Heavy Duty Kvemeland type fines used.

Muck Forks can be supplied with a fully enclosed back or with “see through” back. Depending on the customers particular requirements, a full range of fixing brackets are available to fit most tractor loaders, fork-lifts and telescopic handlers.

Murray Machinery Muck Fork - Top Grab
POA
Murray Machinery Muck Fork - Top Grab Image

The Murray Top Grab further enhances the purpose of the Murray Muck Fork. Its construction consists of a standard Muck Fork with a top grab fitted. The top grab consists of a rigid box selection frame, which is pivoted on the top frame of the Muck Fork. Several curved tines are fitted into tapered sockets on the outer frame of the top grab. Two hydraulic cylinders activate the grab. This combination leads to a very versatile implement with a multitude of uses around the farm.

Murray Machinery Pallet Fork
POA
Murray Machinery Pallet Fork Image

The Murray Pallet Fork features a rigid box section frame on which the pallet forks are mounted. The forks are solid high carbon steel and are fully certified. They are fully adjustable side-ways by means of a slide on the top and bottom of the back frame, they are located at the desired position by 2 spring pins.

The implement is available with a wide range of mounting brackets to suit all industrial loaders and heavy duty tractor loaders.

The Murray Pallet Fork is a must for any loader applications where mobilising palletised material on the farm, industrial premises or construction site are involved.

Murray Machinery Potato Box Tippler
POA
Murray Machinery Potato Box Tippler Image

The Murray Potato Box Tippler is a heavy-duty attachment capable of tipping 1 ton capacity potato boxes through a full 360 degrees to the right of left. Top and side arms are provided for locating the box in a position during the tipping operation, the side arm can be positioned on the right or left and both are adjustable to suit varying box dimensions. Drive is positioned by a low speed high torque hydraulic motor and transmission via a three quarter inch pitch duplex chain drive to the axle of the tippler. The axle revolves in large phosphor bronze bushes with grease lubrication.

Murray Machinery Shear Grab
POA
Murray Machinery Shear Grab Image

The Murray Shear Grab Silage Block cutter is designed to cut blocks of silage from a silage clamp, its rugged construction comprises a front half with serrated front blade and straight side blades, which is pivoted to a heavy duty box section rear frame which has a row of heavy duty fines fitted in to tapered sockets along the bottom. The front half is activated by two large hydraulic cylinders which provide the cutting power of the Shear Grab. This can be fitted to any Loader, Fork Lift or Telescopic Handler

Murray Machinery Silage Fork
POA
Murray Machinery Silage Fork Image

The Murray Large Silage Fork is designed for extra capacity when loading chopped grass onto a silage pit. The frame is more heavily constructed and is fitted with extra duty tines bolted into large tapered sockets fitted along the bottom and the sides of the silage fork. The Large Silage Fork can be supplied to suit larger telescopic handlers and loading shovels.

Murray Machinery Snow Blade
POA
Murray Machinery Snow Blade Image

The Murray Snow Blade comes in various widths and sizes. The blade can be fixed left or right, or can have a manual slew left or right by removing a pin, or can be activated by a double acting hydraulic cylinder. All blades can be fitted with a replaceable rubber edge and castor wheels. Snow Blades can be fitted to tractors, loaders or telescopic handlers etc.

Murray Machinery Square Bale Stacker
POA
Murray Machinery Square Bale Stacker Image

The Murray Square Bale Stacker is designed to stack square bales up to 1200mm x 1200mm x 2500mm. The stacker consists of a central rigid box section frame with hinged gates at either side, the gates have curved tines bolted into sockets that are welded to the outer edge of the gates, the gates are activated by two double acting hydraulic cylinders. The Square Bale Stacker can be fitted to any telescopic handler or large tractor loader.

The Murray Square Bale Stacker can also stack round bales, in a single columnor two columns side by side at any one time.

Murray Machinery Stone Fork
OA
Murray Machinery Stone Fork
POA
Murray Machinery Stone Fork Image

The Murray Stone Fork is constructed from heavy duty box section to create a rigid frame. Heavy duty tines are fitted into tapered sockets along the bottom of the frame and also up each side. Tines are spaced very closely so as to contain all but the smallest stones. The stone fork can be fitted to the front or rear of any tractor, telescopic handler or loader.

Murray Machinery V-Snow Plough
POA
Murray Machinery V-Snow Plough Image

The Murray ‘Vee’ Snow Plough is designed to clear deeper snow than the smaller snow blade, therefore is more heavily constructed and has replaceable ware plates bolted along the bottom edges. They can be supplied to clear various widths, and can be fitted to the front or rear of any tractor or telescopic handler.

Murray Machinery Wrapped Bale Handler
POA
Murray Machinery Wrapped Bale Handler Image

Our range of telescopic handler and tractor loader attachments include

Quick Hitch Systems
Grain Buckets
Big Bale Spikes
Potato Box Tippler
Manure Forks
Pallet Forks
Stone Forks

Special orders catered for,

Nugent Cattle Handling Equipment
POA
Nugent Cattle Handling Equipment Image

Weigh Platforms, Cattle Crushes, Head Locking Gates, Rear Gates and Optional Extras all available.

For generations the Nugent family has been steeped in Agricultural traditions. Using his engineering expertise to facilitate his agricultural requirements on the farm, Sean Nugent the founder of Nugent Engineering began the manufacture of Cattle Crushes to handle and restrain the animal and this is where the Nugent story began over 25 years ago.

As cattle breeding intensified in the 70’s and 80’s there were more demands on the farmer who needed help with production, hence the need for cattle handling equipment. Sean developed the products to suit the demanding irish breeds which resulted in heavy duty crushes to suit heavier handling. With Nugent’s trademark durable construction the cattle handling equipment is designed to last.

Nugent Engineering is at the cutting edge of agricultural equipment design with an extensive and flexible range of cattle handling equipment. For over twenty five years Nugent Engineering has been developing the range and specialises in the design and manufacture of some of the finest crushes on the market today. New methods of production has translated to product innovations and designs.

As leaders in the Irish market Nugent Engineering has invested heavily in research and development and has brought to market a new generation of versatile, robust, heavy duty crushes providing excellent access for general handling. The Nugent Cattle Handling Equipment is designed to suit the requirements of the modern day farmer whilst ensuring safety and reducing stress for both the handler and livestock.

If you would like more information on specific Cattle Handling Equipment then please get in touch

Nugent Livestock Trailer
Varies on spec
Nugent Livestock Trailer Image

This brand new & in stock Nugent Lilvestock Trailer is 12ft complete with sheep decks and a cattle division door.

Nugent Quad-bike Trailer
Varies on spec
Nugent Quad-bike Trailer Image

This brand new & in stock Nugent Quad-bike Trailer is available in various sizes. With mesh sides, a lamb divider and lamb door we will have the trailer to suit your needs.

Nugent Tipper Trailer
POA
Nugent Tipper Trailer Image

The Nugent T-Line is the latest range of Tipper Trailers designed and manufactured for the demanding professional. With full type approval (ECWVTA) it is manufactured with a strong fully welded and galvanised chassis ensuring maximum strength and durability, load capacity, flexibility and safety. Innovative chassis design, combined with all round easy access, excellent tipping angle, drop sides and years of trailer design expertise have produced the perfect trailer for the building, landscaping
and agricultural industries.

Parabolic suspension is standard in all Nugent Trailers and is further enhanced with the Nugent Parabolic Equaliser, this patented addition enhances the towing experience bringing trailer suspension to new levels. Nugents tradition of robust fabricated chassis design has further evolved in the T-Line with the introduction of new materials and innovative design features, combined with a policy of incorporating market leading components to ensure Nugents remain the professionals choice.

The T-Line trailer range is available with maximum gross weight up to 3500kg and sizes from 2.5 metres to 3.7 metres, guaranteeing a suitable model for every application. The standard design includes many desirable features and is complimented with a range of optional extras if further customisation is required.

Standard Features
• Mounted on Unique Nugent Parabolic Equaliser Suspension
• Hydraulic Tipper Ram powered by an On-Board Heavy Duty 12 Volt Battery Power Pack with
Manual Back Up
• Market Leading Knott Brakes
• Auto Reverse Coupling (Semi automatic locking head)
• Fabricated Double Hinged Swing Tail Door
• Loading Board & Drop Sides
• Mud Flaps
• Up to 55o Tipping Angle
• Lockable Coupling and Heavy Duty Jockey Wheel
• One Piece Hardened Metal Floor
• Lockable Ramp Carrier
• Tying Points
• Mounting Bracket and Spare Wheel

Optional Extras
• Removable Ladder Rack
• Mesh Extensions
• Internal Lashing Rings
• Aluminium Skids
• Rear Prop Stands
• LED Lights
• Aluminium Toolbox
• Wireless Remote Control
• Battery Charging Kit
• Manual or Electric Winch
• Electric Plug Adaptor (13-7pin)

Ryetec CH 22 Horizontal Log Splitter
POA
Ryetec CH 22 Horizontal Log Splitter Image

These machines represent the best value range of heavy duty log splitting technology, with heavy duty build quality they are effective and easy use to give years of efficent and active service.

  1. 1. Choose the splitting force, 13,16,22 & 30 tons (40, 50 & 80 ton machines made to order)
  2. 2. Choose the maximum splitting length, 1.05, 1.25, 1.50, 1.75, 2.00, 2.5m & 3.0m
  3. 3. Choose either tractor hydraulic (not recommended for machines over 1.05m splitting) or PTO with self contained oil tank and pump system for reliable and fast operation

Standard Features;

  • Substantial ‘spine’ frame
  • Simple splitting control with automatic return of splitting piston
  • Cat 1 & 2 Three point linkage
  • Angled stationary ‘axe’
  • 2 speed control valve

Options include;

  • Fixed or “floating” cross wedges
  • Twin pumps for faster operation on longer splitting lengths and reduced heating of oil
  • Trailer axle and drawbar instead of 3 point linkage, ideal for longer machines.
  • Hydraulic height adjustment of cross wedge
  • Hydraulic ‘doors’ for acurate placement of trunks for splitting
  • Self powered with petrol or diesel engine
  • High speed axle and overun brakes
  • Remote control for use with cranes

CH40, 40 ton splitter with trailer, hydraulic cross wedge and remote control

Ryetec ECO 85 Log Splitter
Varies on spec
Ryetec ECO 85 Log Splitter Image

BRED NEW & IN STOCK

The ECO 85 Log Splitter has a large, strong frame with a powerful 7 ton splitting force. This machine can split very hard seasoned wood and with the standard cross wedge can cut logs into four with just one stroke. The cross wedge is easily and quickly removed for tackling harder and more awkward logs. This machine comes fully electrical with 13amp 220v x 3hp. With a cross wedge, quick wedge and extension wedge included.

132 KG, size (cm) 43x105x102

Ryetec Various Toppers and Flail Mowers
POA
Ryetec Various Toppers and Flail Mowers Image

We offer a variety of Flail Mowers and Toppers from the Ryetec range.

Contractor Heavy Duty Flail Mowers

Designed to perform even in the most extreme conditions

  • Particularly suitable in long/wet grass, scrub, heather, bracken and gorse
  • Three point linkage mounted, easily manoeuvred conditions
  • Ground or high tipping models
  • Easy to control working height
  • Floating linkage allows machine to follow ground contours effectively
  • Suitable for use with larger compact and agricultural type tractors

NEW (2016) “SUPER” models available from C1600C upwards include;

  • Stronger flail design with more weight
  • 20mm fixing bolt
  • Machined heavy duty rotor bearing housing
  • Side skids on mower frame

If you don’t see what you are looking for then please get in contact and we can see what we can do to help.

Rytec Contractor Circular Saw CS 700
Rytec Contractor Circular Saw CS 700 Image

Ryetecs Contractor circular log saws offer a heavy duty machine capable of years of effective service in the hardest conditions. A sturdy & solid chassis with easy action pivoting bench gives an effective and natural working motion for high speed cutting and maximum output. An extending log support combined with steel & platic rollers means logs move up the bench with the minimum of effort. The Ryetec Contractor saw features a 700mm saw blade (600mm on single phase electric) capable of cutting material up to 300mm (12″) in size in one cut with hardened tungsten tips. Three choices of power source are available, Tractor PTO driven units have a Cat 1/2 three point linakge and four substantial feet. Electric powered units either 3hp single phase (600mm diameter blade only) or 5.5hp three phase have convenient wheels and handles to allow for easy movement and storage.

Features;

  • 700mm tungsten saw blade
  • Pivoting saw bench (locking transport position) with steel roller for easy loading
  • Automatic blade guard
  • Extendable log support with plastic rollers

The tractor driven version of the saw can also be specified with a hydraulic driven conveyor for easy loading of logs directly into bag, boxes, trailers, pickups etc speeding up operations and saving labour. Logs can be split in 1 + metre lengths with one of Ryetecs Contractor vertical or horizontal splitters and seasoned and then cut and loaded in one operation. The whole machine can be opened and closed in to a compact size for easy transport between jobs and twin jacks mean the machine is stable even in difficult ground conditions.

Available in the following specifications;

700mm saw +;

  • 250mm wide 3 metre fixed conveyor (manual folding) Model, CS700/EV3
  • 250mm wide 4 metre fixed conveyor (manual folding) Model, CS700/EV4
  • 250mm wide 4 metre telescopic conveyor (manual folding & hydraulic extending)Model, CS700/EVH4

Other options include;

  • 5 metre conveyor
  • Hydraulic speed control of conveyor
  • 350mm wide conveyor
  • Internal hydraulic system, PTO powered
  • Power operated bench
  • 12 ton hydraulic splitter
  • Very heavy duty version with bearing mounted bench, log grips and log measure
Secure Covers
POA
Secure Covers Image

Secure Covers® for silage clamps

Secure Covers® make sheeting up silage clamps quick, clean and easy. Made from tough interlocked knitted HDPE, Secure Covers are used over silage sheets and fixed in place using Secure Gravel Bags

Once fitted, Secure Covers’ unique construction disperses wind gusts ensuring that the silage sheet remains in place on the silage pit.

Flexible Secure Covers reduce surface waste by keeping the silage sheet in close contact with the silage surface. The finely knitted mesh helps to prevent bird damage to the silage sheet and when pulled down, stops birds feeding on the feed face.

Silage protection without tyres

  • Labour saving
  • Flexible non-fray knit – 300g/m2
  • Reduces waste
  • Reduces bird damage
  • No tyre wire problems
  • Gravel bags for a superior seal
  • 16 sizes
  • 10 year full UV stability guarantee
  • Standard delivery 3 working days

Strong and secure

Secure Covers are so strong that they can prevent damage to the silage sheet from cats, dogs, people and even cattle. Read more about the benefits of using Secure Covers on:

Silawrap
POA
Silawrap Image

Silawrap protects, preserves and enhances your crop. With superior puncture resistance and more bales per roll. The 3 layer lown construction with reduced neck down is available in black, green and white.

Wrapped Bale Clamp
POA
Wrapped Bale Clamp Image

Our range of telescopic handler and tractor loader attachments include

Quick Hitch Systems
Grain Buckets
Big Bale Spikes
Potato Box Tippler
Manure Forks
Pallet Forks
Stone Forks

Special orders catered for,

Used
Used 24 Meter John Deere 512 Sprayer Image
Used 24 Meter John Deere 512 Sprayer
Godd working condition John Deere 512 Sprayer 24 meters. Manufactured in 2008 and has been worked for 3 years.
£7000.00
Used Marshall Barrel Spreader Image
Used Marshall Barrel Spreader
Mint condition, only used for 1 season, Marshall Barrel Spreader. With 9cubes capacity and flotation tyres this spreader is only 8 years old.
£2750.00
14 Foot Tri-Axle, 3.5 tonne gross Flatbed Trailer Image
14 Foot Tri-Axle, 3.5 tonne gross Flatbed Trailer
Brand new 14 Foot Tri-Axle, 3.5 tonne gross Nugent Flatbed Trailer
Varies on spec
BRAND NEW Trioliet Feed Wagon Image
BRAND NEW Trioliet Feed Wagon
TRIOLIET FEED WAGON BRAND NEW AND NEVER BEEN USED. 1800 ZK Electronic Weighing Reduction Gearbox LED Lights 20mm Augers 2x Top Knives 4x Long Knives 6x Short Knives Rubber Hayring... Read More
Don Valley Grass Seed Image
Don Valley Grass Seed
We offer a selection of Don Valley Agricultural Grass Seed. For further information please contact us
Gravel Road Grader Image
Gravel Road Grader
The Murray Gravel Road Grader is designed to level out any gravel road that has fallen into disrepair, by levelling off the high spots on the road and filling in the low spots. it is possible to adjust the camber on the grader so that th... Read More
Machinery Oil Image
Machinery Oil
GB Lubricants Machinery Oil Oil to suit most tractors and machinery working in either the Agricultural or Plant environment. We have the facility to spec oil types as required by specific machinery. Grease is also available in spe... Read More
Marshall BC Pallet/Bale Trailer Range Image
Marshall BC Pallet/Bale Trailer Range
The basic construction methods and materials used in the BC range ensures that every model conforms to the heavy-duty build standard of all Marshall products. Chassis Design – every model benefits from heavy-duty channels to... Read More
Marshall Drop-side Range Steel Trailers Image
Marshall Drop-side Range Steel Trailers
The Marshall range of drop-side trailers can be configured to suit almost any requirement. Grain Sides – Available on S/5 upwards; comes complete with a full height door to allow bulky loads to be safely discharged Si... Read More
Marshall FB Feed Barrier Range Image
Marshall FB Feed Barrier Range
Simple and Strong Frame Design – box section steel framework, which benefits from a fully welded construction for strength and rigidity. The ends of our feed barriers are also profiled from 5mm steel to further enhance the b... Read More
Marshall FT Feed Trailer Range Image
Marshall FT Feed Trailer Range
Construction – tapered sides to allow for easy feeding. Every model also benefits from a fully welded steel construction with 5mm ends and 3mm or 4mm sides. Floor – the entire range has 30mm treated pine floors, which ... Read More
Marshall HD Hybrid Dumper Trailer Range Image
Marshall HD Hybrid Dumper Trailer Range
The HD hybrid dumper trailer range has been designed to handle a wide variety of different tasks; from shifting muck on farm to the toughest construction work. Rubble & Stone – the floor on the HD/6 model is 6mm thick, w... Read More
Marshall Livestock Container Range Image
Marshall Livestock Container Range
The livestock container range provides a simple, efficient and good value way to shift livestock between farms or transport them to market. Value – our livestock containers all provide an excellent value method for moving li... Read More
Marshall MS Muck Spreader Range Image
Marshall MS Muck Spreader Range
The legendary MS range has been developed over thirty years of producing muck spreaders; with a number of unique design features and durable construction the MS range continues to be the industry leading spreader. Barrel Design &#... Read More
Marshall QM Monocoque Trailer Range Image
Marshall QM Monocoque Trailer Range
The QM range combines superior construction and clever design to create trailers that are strong, reliable and durable; the basic requirements of any good trailer Body Design – the floors of the entire range are 5mm thick an... Read More
Marshall ST Slurry Tanker Range Image
Marshall ST Slurry Tanker Range
The ST slurry tanker range has been developed with strength and durability as the guiding principles. Tank Design – every model has a 6mm thick steel tank that is rolled and fully-welded by a sub-arc welder to ensure a consi... Read More
Marshall VES Rear-Discharge Spreader Range Image
Marshall VES Rear-Discharge Spreader Range
No floor chains = no problems. The Marshall VES range is the next step forward in the design of rear-discharge spreaders, eliminating the problematic floor-chain set-up and the associated maintenance requirements. This mechanism i... Read More
Murray Machinery 4 in 1 Bucket Image
Murray Machinery 4 in 1 Bucket
The Murray Four in One Bucket is a multi purpose bucket/blade with a variety of applications around the farm or building site. The Bucket comprises of two halves, the rear half being attached to any loader or telescopic handler, t... Read More
Murray Machinery Big Bag Lifter Image
Murray Machinery Big Bag Lifter
The Murray Big Bag Lifter is designed to lift up to 4 Big Bags to a maximum weight of 2.4 tons. Two extra heavy duty tubes are welded to the top of a heavy box section frame giving the bag lifter extra height for filling fertiliser sprea... Read More
Murray Machinery Big Bale Multihandler Image
Murray Machinery Big Bale Multihandler
The Murray Big Bale Multi Handler is designed to handle round bales, square bales, wrapped or unwrapped bales. The framework is constructed from heavy box section with a paddle frame pivoted at the front, which can be adjusted in and out... Read More
Murray Machinery Big Bale Stacker Image
Murray Machinery Big Bale Stacker
Our range of telescopic handler and tractor loader attachments include Quick Hitch Systems Grain Buckets Big Bale Spikes Potato Box Tippler Manure Forks Pallet Forks Stone Forks Special o... Read More
Murray Machinery Big Bale Transporter Image
Murray Machinery Big Bale Transporter
The Murray Big Bale Transporter is a multi-bale spike capable of up-loading four big bales up to 5 in diameter in one operation, so enabling the tractor operator to clear a field of bales in a very short time. The implement fits onto the... Read More
Murray Machinery Buckrake Tractor Image
Murray Machinery Buckrake Tractor
The Murray Push Off Buckrake comes in two different versions, one is dedicated to Telescopic Handlers and one is to suit the front of rear linkage of tractors. The Tele Handler version consists of a rigid back frame constructed fr... Read More
Murray Machinery Double Bale Spike Image
Murray Machinery Double Bale Spike
The Murray Double Bale Spike is constructed from heavy duty box section and has four heavy duty tines bolted into sockets along the bottom frame of the spike. The Murray Double Bale Spike also comes in a “fold up” version, thi... Read More
Murray Machinery Fermec Quick Hitch Image
Murray Machinery Fermec Quick Hitch
The purpose of the Murray Quick Hitch Attachment is to allow the operator to change quickly from one implement to another. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into ... Read More
Murray Machinery Fork Lift Drive in Grain Bucket Image
Murray Machinery Fork Lift Drive in Grain Bucket
The Murray Fork Lift Drive in Grain Bucket is a Hi Tip bucket designed to suit standard mast type forklifts where there is no hydraulic tipping mechanism available. The Drive in bucket consists of a bucket shell attached to a separate un... Read More
Murray Machinery Fork Lift Hydraulic Tipping Bucket Image
Murray Machinery Fork Lift Hydraulic Tipping Bucket
The Murray Forklift Hydraulic Tipping Bucket is designed for standard mast type forklifts where there is no hydraulic tipping mechanism available. The hydraulic tipping bucket consists of a standard bucket shell, with a hydraulic tipping... Read More
Murray Machinery General Purpose Bucket Image
Murray Machinery General Purpose Bucket
The Murray General Purpose Bucket is designed for heavier work around the farm or building site and is strong enough for digging stones and earth. It has extra bracing at all the stress points and has an anti-spill extension at the top. ... Read More
Murray Machinery Grain Bucket Image
Murray Machinery Grain Bucket
The Murray Grain Bucket comes in a range of capacities to cover all farm grain handling needs. Front and side leading edges are reinforced for extra durability, wear strips are provided on the underside and bracing on the inside of the b... Read More
Murray Machinery Grain Pusher Image
Murray Machinery Grain Pusher
The Murray Grain Pusher is designed to push grain considerably higher than is possible with a standard grain bucket. It consists of a blade which is attached to a long box section frame with Tractor ‘Loader or Telescopic Handler mo... Read More
Murray Machinery Hi Tip Grain Bucket Image
Murray Machinery Hi Tip Grain Bucket
The Murray Hi Tip Grain Bucket is a combination of a standard Grain Bucket shell fitted to a separate under carriage, which is pivoted at the front of the bucket. Two double acting hydraulic cylinders activate the bucket and effect compl... Read More
Murray Machinery JCB Quick Hitch Image
Murray Machinery JCB Quick Hitch
The purpose of the Murray Quick Hitch Attachment is to allow the operator to change quickly from one implement to another. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one implement and into ... Read More
Murray Machinery Log Grabber Image
Murray Machinery Log Grabber
The Murray Log Grab is a ruggedly constructed frame with two fixed bottom legs and a two leg top grab hinged at the top of the back frame. The grab is activated by two double acting hydraulic cylinders. The shape of the bottom and top le... Read More
Murray Machinery Merlo/Matbro Adapter Image
Murray Machinery Merlo/Matbro Adapter
  The purpose of the Murray Quick Hitch Attachment is to allow the operator to change quickly from one implement to another. This is done by releasing the locking lever at the side of the Quick Hitch, driving out of one imple... Read More
Murray Machinery Muck Fork Image
Murray Machinery Muck Fork
The Murray Muck Fork range is manufactured to suit from the smallest tractor loader right up to the largest telescopic handler. They are all well constructed from heavy duty box section to create a rigid frame, the bottom member i... Read More
Murray Machinery Muck Fork - Top Grab Image
Murray Machinery Muck Fork - Top Grab
The Murray Top Grab further enhances the purpose of the Murray Muck Fork. Its construction consists of a standard Muck Fork with a top grab fitted. The top grab consists of a rigid box selection frame, which is pivoted on the top frame o... Read More
Murray Machinery Pallet Fork Image
Murray Machinery Pallet Fork
The Murray Pallet Fork features a rigid box section frame on which the pallet forks are mounted. The forks are solid high carbon steel and are fully certified. They are fully adjustable side-ways by means of a slide on the top and bottom... Read More
Murray Machinery Potato Box Tippler Image
Murray Machinery Potato Box Tippler
The Murray Potato Box Tippler is a heavy-duty attachment capable of tipping 1 ton capacity potato boxes through a full 360 degrees to the right of left. Top and side arms are provided for locating the box in a position during the tipping... Read More
Murray Machinery Shear Grab Image
Murray Machinery Shear Grab
The Murray Shear Grab Silage Block cutter is designed to cut blocks of silage from a silage clamp, its rugged construction comprises a front half with serrated front blade and straight side blades, which is pivoted to a heavy duty box se... Read More
Murray Machinery Silage Fork Image
Murray Machinery Silage Fork
The Murray Large Silage Fork is designed for extra capacity when loading chopped grass onto a silage pit. The frame is more heavily constructed and is fitted with extra duty tines bolted into large tapered sockets fitted along the bottom... Read More
Murray Machinery Snow Blade Image
Murray Machinery Snow Blade
The Murray Snow Blade comes in various widths and sizes. The blade can be fixed left or right, or can have a manual slew left or right by removing a pin, or can be activated by a double acting hydraulic cylinder. All blades can be fitted... Read More
Murray Machinery Square Bale Stacker Image
Murray Machinery Square Bale Stacker
The Murray Square Bale Stacker is designed to stack square bales up to 1200mm x 1200mm x 2500mm. The stacker consists of a central rigid box section frame with hinged gates at either side, the gates have curved tines bolted into sockets ... Read More
Murray Machinery Stone Fork Image
Murray Machinery Stone Fork
The Murray Stone Fork is constructed from heavy duty box section to create a rigid frame. Heavy duty tines are fitted into tapered sockets along the bottom of the frame and also up each side. Tines are spaced very closely so as to contai... Read More
Murray Machinery V-Snow Plough Image
Murray Machinery V-Snow Plough
The Murray ‘Vee’ Snow Plough is designed to clear deeper snow than the smaller snow blade, therefore is more heavily constructed and has replaceable ware plates bolted along the bottom edges. They can be supplied to clear var... Read More
Murray Machinery Wrapped Bale Handler Image
Murray Machinery Wrapped Bale Handler
Our range of telescopic handler and tractor loader attachments include Quick Hitch Systems Grain Buckets Big Bale Spikes Potato Box Tippler Manure Forks Pallet Forks Stone Forks Special o... Read More
Nugent Cattle Handling Equipment Image
Nugent Cattle Handling Equipment
Weigh Platforms, Cattle Crushes, Head Locking Gates, Rear Gates and Optional Extras all available. For generations the Nugent family has been steeped in Agricultural traditions. Using his engineering expertise to ... Read More
Nugent Livestock Trailer Image
Nugent Livestock Trailer
This brand new & in stock Nugent Lilvestock Trailer is 12ft complete with sheep decks and a cattle division door.
Varies on spec
Nugent Quad-bike Trailer Image
Nugent Quad-bike Trailer
This brand new & in stock Nugent Quad-bike Trailer is available in various sizes. With mesh sides, a lamb divider and lamb door we will have the trailer to suit your needs.
Varies on spec
Nugent Tipper Trailer Image
Nugent Tipper Trailer
The Nugent T-Line is the latest range of Tipper Trailers designed and manufactured for the demanding professional. With full type approval (ECWVTA) it is manufactured with a strong fully welded and galvanised chassis ens... Read More
Ryetec CH 22 Horizontal Log Splitter Image
Ryetec CH 22 Horizontal Log Splitter
These machines represent the best value range of heavy duty log splitting technology, with heavy duty build quality they are effective and easy use to give years of efficent and active service. 1. ... Read More
Ryetec ECO 85 Log Splitter Image
Ryetec ECO 85 Log Splitter
BRED NEW & IN STOCK The ECO 85 Log Splitter has a large, strong frame with a powerful 7 ton splitting force. This machine can split very hard seasoned wood and with the standard cross wedge can cut logs into four with just one... Read More
Varies on spec
Ryetec Various Toppers and Flail Mowers Image
Ryetec Various Toppers and Flail Mowers
We offer a variety of Flail Mowers and Toppers from the Ryetec range. Contractor Heavy Duty Flail Mowers Designed to perform even in the most extreme conditions ... Read More
Rytec Contractor Circular Saw CS 700 Image
Rytec Contractor Circular Saw CS 700
Ryetecs Contractor circular log saws offer a heavy duty machine capable of years of effective service in the hardest conditions. A sturdy & solid chassis with easy action pivoting bench gives an effective and natural working motion... Read More
Secure Covers Image
Secure Covers
Secure Covers® for silage clamps Secure Covers® make sheeting up silage clamps quick, clean and easy. Made from tough interlocked knitted HDPE, Sec... Read More
Silawrap Image
Silawrap
Silawrap protects, preserves and enhances your crop. With superior puncture resistance and more bales per roll. The 3 layer lown construction with reduced neck down is available in black, green and white.
Wrapped Bale Clamp Image
Wrapped Bale Clamp
Our range of telescopic handler and tractor loader attachments include Quick Hitch Systems Grain Buckets Big Bale Spikes Potato Box Tippler Manure Forks Pallet Forks Stone Forks Special o... Read More